Current Sensor ICs
Magnetic Digital Position Sensor ICs
Magnetic Linear and Angular Position Sensor ICs
Magnetic Speed Sensor ICs
Motor Driver and Interface ICs
Tel: +86-755-86026226
FAX: +86-755-82762307
Crankshaft Sensor ICs

Crankshaft Sensor ICs

Crankshaft, crankshaft position sensor, crank sensor, crankshaft sensorAllegroˇŻs portfolio of crankshaft sensor ICs is well suited to meet the applications needs
for speed-only and direction detection requirements. Allegro was the first to market with
Hall-effect crankshaft sensor ICs with direction detection (a required component for
start-stop engine technologies), and leads the way in market performance for both
speed-only and direction detection crankshaft sensor ICs.

Allegro sensor ICs are available in the Gear-Tooth Sensor (GTS) package with integrated
back-biasing magnet for ease of implementation and high performance with a ferrous
metal target; as well as in SIP package offerings with and without integrated bypass
capacitors, for use with encoded ring magnet targets.

Crankshaft Sensor ICs Selection Guide

Highly-Accurate Analog Speed Sensor ICs
Part Number Operate Point (G) Release Point (G) Hysteresis (g) Min. Speed Packages
A1421 0 to 27.5 -12.5 to 7.5 Typ 15 20 Hz K
A1422 5 to 35 -35 to -5 Typ 30 20 Hz K
A1423 10 to 100 -100 to -10 Typ 130 20 Hz K
A1425 -11 to 11 -11 to 11 Typ 8.5 20 Hz K
Gear-Tooth Hall-Effect Speed Sensor ICs (Includes IC and Magnet)
Part Number Supply Voltage (V) Output Type Power-On State Specified Air Gap Range (>20 Hz) Key Spec Min. Speed Packages
ATS616 3.5 to 24 3-wire High (off) 0.4 to 2.5 mm Timing accuracy 10 Hz SG
ATS627 4 to 24 3-wire High (off) 0.5 to 3 mm Repeatability Zero speed SG
Temperature range code: L = -40ˇăC to 150ˇăC
About Us
Tel: +86-755-86026226 FAX: +86-755--82762307